--read CCcam.cfg for details-- 
 
2.0.8 
-fixed n2 emu freezes with static (non-openssl) version 
-improved system selection (making prio file mostly obsolete) 
 
2.0.7 
-fixed camcrypt on static (non-openssl) version 
-fixed segfault reading config 
 
2.0.6 
-ignore errors on emm demux (caused n2 AU to abort on certain hardware) 
-tps au fix 
-various optimizations; avoid server slowing down because of slow clients 
 
2.0.5 
-global share limits (see CCcam.cfg for details) 
-global minimum required downhops setting (see CCcam.cfg for details) 
-n2 AU fix (/var/keys/ROM120.bin required) 
-cryptoworks sc fix 
-90f sc fix 
-viaccess sc emm fix 
-changed 'double client login reject' mechanism 
-G line local sharing fixed 
-graceful shutdown 
 
2.0.4 
-support more than one emm listener (see CCcam.cfg for details) 
-tps au fixes 
-nds sc init fix 
 
2.0.3 
-nagra fixes 
-G line remote sharing fixed 
-conax ca pin support (use 'PIN:' in CCcam.cfg) 
-added SMARTCARD WRITE DELAY setting, to tweak performance on mastera/sc8in1 and such 
-moved providernames to an external file /var/etc/CCcam.providers. Format is 'hexvalue "providername" comments' 
-channelname can now be displayed in webif instead of caid:ident:sid when defined in /var/etc/CCcam.channelinfo 
-demuxapi support dropped 
-gbox indirect: reuse slots 
-avoid glitch when zapping over recorded channel (7025) 
-two cam devices on DM600 
 
1.7.0 
-fixed password bug (consider using "MINIMUM CLIENT VERSION: 1.7.0" to avoid risk) 
-added viaccess smartcard emm 
-added support for gbox indirect/local connection 
-added optional ip address/hostname to F: line, no ip given allows the connection from all ip's (See CCcam.cfg for example) 
-tps au (tune to Hotbird transponder 10873 vertical) 
-added smartcard custom post-init (see CCcam.cfg) Currently only T=0 supported 
-support to override detected dvb api version 
-support sc8in1 (note: PHOENIX READER PATH --> SERIAL READER in CCcam.cfg) 
-fixed crash when reading malformed SoftCam.Key 
-fixed possible crash betacrypt smartcard emm 
-minor irdeto improvements 
-added config option to avoid (hidden) chids being ignored on irdeto smartcard (See CCcam.cfg) 
-added timeslots per friend connection, now possible to only open connection for a few hours (See CCcam.cfg for example) 
-Nagra emu fixes 
 
1.6.1 
-fixed irdeto camdata setting (setting was not used correctly in 1.6.0) 
-CCcam.prio: nagra caid:ident entries with nonzero ident now always match 
(nagra ident is unknown at time of prio check, see CCcam.cfg for details) 
-few small workarounds for buggy 7025 scidriver 
-show share (nodeid_handlerid) in ecm.info 
-tps.bin support (fixed location /var/keys/tps.bin), using systemtime 
 
1.6.0 
-fixed wrong irdeto camdata default (since 1.4.0) 
-implemented irdeto camdata setting 
-improved self learning for irdeto 
-fixed constant cw 
-added biss support 
-added priolist support 
-max C / F username length now 20 instead of 19 
-max C / F password length now unlimited instead of 16 
-switches to enable/disable web and telnet info info interfaces 
1.3.0 
-fixed some 64 bits issues 
-fixed radegast provider id and nano field 
-reduced binary size 
-immediately interrupt lengthy emu calculations when zap takes place 
-userinfo was not correctly reread, therefore you needed to restart CCcam when certain parts of the userinfo changed, fixed 
-it is now possible to block a channel for a client, based on caid:id:sid see F entry config for an example 
-changed emu share limits behaviour, <1.3.0 an emu matched a F entry limit with {caid:ident:n}, for any nonzero ident. >=1.3.0, an emu only matches {caid:0:n} 
-added '-l' cmdline option, to disable all 'self-learning' stuff. This option might avoid problems with irdeto smartcards 
-ports 15000-15004 and port 14000 are now gone. Use 16000 and 16001 (html) instead 
-implemented workerthread pool to handle client requests, to improve handling larger numbers of clients 
-added support for cryptoworks camcrypted cards (incl arena tv). IPK handing is internal, no need for external keys and such 
-added support for BEEF patched cards using nagra over seca tunnelling, add id's in config file(see example) 
-ecm request cache didn't work in all situations, caching fixed and improved. 
-emm didn't always work on demuxapi systems (e.g. relook, mutant). Fixed. 
-WARNING: F: entry syntax changed, check and update your CCcam.cfg; added parameters to allow emusharing and emm, per client 
 
1.1.1 
-when a share doesn't work for a certain channel, skip aliases of that share for that channel 
(aliases are the same cards shared through different routes, they have equal nodeID_shareID at the end of their line in the output on port 15002) 
-ignore '0' providerids on seca cards 
-nagra2 emu fix for some providers 
-fixed occasional nds emm freeze 
-allow multiple L: entries to connect to different cards on the same camd3 server/port 
-fixed phoenix on certain comport chipsets 
-optimized share protocol (backward compatibility with <1.1.1 guaranteed, warning, will be removed in next release) 
 
1.1.0 
-camd3 support, one card per L: line 
-support to add downshare limits to F: entries 
 
1.0.0 
-first public release 
-various smartcards 
-various emus 
-share2share support (C: and F: entry) 
-newcamd support (N: entry) 
-radegast support (R: entry) 
-all shares are available for clients on a single port (default 12000) 
-emu's can be shared one hop down only 
-cards can be shared multiple hops down 
-each CCcam node has a unique nodeid 
-routes to a card are given with nodelists 
-when a card is reachable through multiple routes, each unique route will be available as individual share 
-shares with nodeid 'abc' in the routelist are never sent to client with nodeid 'abc', to avoid route loops 
-watch your shares, including full routelist, on port 15002 
-start with -h to view available commandline options 
-syslog support, start with -v for more verbosity 
-start with -d to run in foreground, and log to console instead of syslog 
-inserted cards (in either available reader) start working right away 
-all used config and key files are re-read on change, never need to restart CCcam